H185 PLUG-ON TRANSMITTER OPERATING INSTRUCTIONS and trouble-shooting guide LECTROSONICS, INC. Rio Rancho, NM
SERVICE AND REPAIR If your system malfunctions, you should attempt to correct or isolate the trouble before concluding that the equipment needs repai
LIMITED ONE YEAR WARRANTY The equipment is warranted for one year from date of purchase against defects in materials or workmanship provided it was pu
INTRODUCTION Thank you for selecting the Lectrosonics Professional Series wireless microphone system. This system represents well over 10 years of ma
GENERAL TECHNICAL DESCRIPTION The H185 transmitter is comprised of four major functional subsystems: the input compressor, the mic preamp/gain contro
CONTROLS AND FUNCTIONS The H185 may be used with a wide variety of microphones. The 3-pin XLR type connector on the H185 allows the transmitter to b
The POWER LED is connected to a precision battery test circuit that continuously monitors battery voltage. The LED is at full brightness with a new 9
OPERATING INSTRUCTIONS 1) Insert the H185 into the selected microphone. Listen for the "click" that indicates the H185 has locked on to th
The LEVEL LED turns on at -10dB below full deviation. The LIMIT LED turns on at full deviation and indicates that the input shunt compressor is opera
TROUBLESHOOTING Before going through the following chart, be sure that you have a good battery in the transmitter the red power LED on the transmitte
SPECIFICATIONS AND FEATURES Operating frequencies: 150 to 216 MHz RF Power output: 50mW Deviation: +/- 15kHz Spurious radiation: 55dB below carri
Comments to this Manuals