Lectrosonics LMa User Manual download pdf (Page 11)

Frequency-Agile UHF Belt-Pack Transmitter

Rio Rancho, NM

11

NOTE: This termination is intended for UHF

transmitters only. VHF transmitters with 5-pin

jacks require a different termination. Lectrosonics

lavaliere microphones are terminated for

compatibility with VHF and UHF transmitters,

which is different than what is shown here.

Microphone Cable Termination

for Non-Lectrosonics Microphones

TA5F Connector Assembly

Mic Cord Stripping Instructions

1

23

4

5

VIEW FROM SOLDER

SIDE OF PINS

0.3"

0.15"

Crimping to Shield and Insulation

Shield

Insulation

Strip and position the cable so that the clamp

can be crimped to contact both the mic cable

shield and the insulation. The shield contact

reduces noise with some microphones and the

insulation clamp increases ruggedness.

Crimp these

ﬁngers to

contact the

shield

Crimp these

ﬁngers to

clamp the

insulation

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comments to this Manuals

No comments