T187 VHF HAND-HELD TRANSMITTER OPERATING INSTRUCTIONS and trouble-shooting guide LECTROSONICS, INC. Rio Rancho, NM
SERVICE AND REPAIR If your system malfunctions, you should attempt to correct or isolate the trouble before concluding that the equipment needs repa
VHF Hand-held Transmitter SPECIFICATIONS AND FEATURES Operating frequencies: 150 to 216 MHz RF Power output: 50mW Deviation: ± 15kHz Spurious em
LIMITED ONE YEAR WARRANTYThe equipment is warranted for one year from date of purchase against defects in materials or workmanship provided it was pur
INTRODUCTION Thank you for selecting the Lectrosonics T187 hand-held wireless transmitter. The T187 combines over 80 years of engineering experie
VHF Hand-held Transmitter GENERAL TECHNICAL DESCRIPTION The T187 transmitter is comprised of a number of functional sub-systems as shown in the blo
CONTROLS AND FUNCTIONS EXTERNAL “P” SWITCH -- POWER ON/OFF A slide switch which turns battery power on and off. The LED next to the switch lights
VHF Hand-held Transmitter INTERNAL CONTROLS - SHURE SM87 VERSION -10 dB This switch enables an extra 10dB of audio attenuation for those rare times
BASS FILTER In addition to the tone controls, the T187 also has a built in bass filter. This filter is fixed and cannot be adjusted or defeated.
Step 6VHF Hand-held Transmitter BATTERY INSTALLATION The T187 transmitter is powered by a standard alkaline 9 Volt battery. It is important that yo
OPERATING INSTRUCTIONS 1) Install a fresh battery according to the instructions on page 7. 2) Move the internal bypass slide switches to the l
VHF Hand-held Transmitter TROUBLESHOOTING Before going through the following chart, be sure that you have a good battery in the transmitter. I
Comments to this Manuals