Lectrosonics UMC16a User Manual

UMC 16A RF DISTRIBUTION SYSTEM OPERATING INSTRUCTIONS and trouble-shooting guide Rio Rancho, NM, USA www.lectrosonics.com

INTRODUCTION The UMC16 multi-coupler combines ceramic filtering with low noise, high intercept point RF distribution to provide outstanding performanc

GENERAL TECHNICAL DESCRIPTION A universal power supply provides operation world-wide. An LED on the front panel verifies the presence of power

REAR PANEL DESCRIPTION ANT ARF OUT 12V DC IN 400MA MAX ANT B RF OUT 100 - 240 VAC 10 WATTS UMC16A S/N 0000 000-111 MHz Figure 3 - UMC16a

ANTENNA USE AND PLACEMENT Position the antennas so that they are not within 3 or 4 feet of large metal surfaces. If this is not possible,

SPECIFICATIONS Type: Active RF distribution system with ceramic filtering Inputs: Two 50 Ohm BNC jack on rear panel Third order intercept: +27dB

SERVICE AND REPAIR If your system malfunctions, you should attempt to correct or isolate the trouble before concluding that the equip-m

LIMITED ONE YEAR WARRANTY The equipment is warranted for one year from date of purchase against defects in materials or workmanship provi