UT INSTRUCTION MANUAL Synthesized UHF Hand-Held Transmitter Featuring Digital Hybrid Wireless® Technology* *US Patent 7,225,135 Fill in for your reco
UT Changing Capsules 1) Remove windscreen 2) Loosen and remove the two screws that attach the capsule to the micro-phone body 4) Disconne
Synthesized UHF Hand-Held Transmitter 7) Insert and tighten both socket head screws 8) Replace windscreen The latest mounting kit includes hex hea
Synthesized UHF Hand-Held Transmitter 5) Once the audio gain has been set, the signal can be sent through the sound syste
UT Battery Installation The transmitter is powered by a standard alkaline or lithium 9 Volt battery. Alkaline batteries will provide about 3.5
Synthesized UHF Hand-Held Transmitter Operating Notes The Audio Level control should not be used to control the volume of the overall so
Synthesized UHF Hand-Held Transmitter
UT Service and RepairIf your system malfunctions, you should attempt to correc
Synthesized UHF Hand-Held Transmitter Rio Rancho, NM 19
UT LECTROSONICS, INC. 2
14 July 2011
Synthesized UHF Hand-Held Transmitter Table of Contents General Technical Description ...
UT General Technical Description Introduction The UT Digital Hybrid Wireless™ handheld transmitter uses state-of-the-art wireless technology
Synthesized UHF Hand-Held Transmitter Compatibility Modes The transmitter was designed to operate with Lectro-sonics Digital Hybrid Wir
UT LECTROSONICS, INC.6 Power On/Off Switch
Synthesized UHF Hand-Held Transmitter Frequency Switches Two 16-position rotary switches (located under the bat-tery door) adjust the operat
UT
Synthesized UHF Hand-Held Transmitter Subsonic Noise Filter In addition to the tone controls, the UT also has a built-in subsonic noise (or
Comments to this Manuals