Lectrosonics VP18R User Manual Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 10
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
CONTROLS AND FUNCTIONS
The on/off switch on the microphone body controls only the microphone output. It does not switch the power on or off
on the main unit. Current is being drained from the battery pack whenever the red indicator lamp is lighted.
VOLUME - ON/OFF
This knob is used to switch the power on or off on the main unit. The PWR lamp will light when the unit is turned on,
but does not indicate the charged status of the battery. It is more of a reminder to turn the unit off after use. It is also
used to control the volume on the unit as well as the output volume of the HI LEVEL OUT jack.
HI LEVEL IN
This jack may be used with line level or auxiliary outputs from tape decks, or other P.A. systems. Various cords are
available from the factory or at almost any audio or electronics store. The volume level on this jack is preset at a fixed
level, so you will have to adjust the loudness of a tape deck plugged into this jack with the volume control on the tape
deck. The volume control knob on the Voice Projector will not affect this input.
HI LEVEL OUT
This jack provides an output signal for line level or “AUX” inputs of tape recorders or other P.A. systems. This feature
is particularly useful for recording auctions. The volume control on the unit will control the output volume of this jack
so it is important to adjust the record level on your tape recorder after you have set the volume control on the Voice
Projector. For tape recorders with an automatic level control, you will usually not have to make an adjustment. Be
sure you connect the output of this jack to an “AUX” type of input on the tape recorder. Plugging into a “MIC” input will
probably cause distorted sound.
MINI JACK
The VP18R offers a MINI JACK for electret microphones such as the HM142V headset models. This is the smaller
“mini” jack on the control panel.
1/4 INCH JACK
This is for use with standard, low-impedance dynamic microphones. Be sure to insert the microphone plug fully into
this jack for proper operation. You should feel two clicks when it is fully seated.
CHARGING LAMP
This lamp will always be lit as long as the charger is plugged into the CH-40 CHARGER JACK.
OUT
IN
Charger
Jack
and LED
HI
LEVEL
Mini Jack Input
1
/4 Inch Jack Input
High Level Out
High Level In
Power On/Off
and Volume
4
Page view 3
1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments