Rio Rancho, NM, USAwww.lectrosonics.comFill in for your records: Serial Number: Purchase Date:SPNCWBDigital Conference InterfaceINSTALLATION and STA
SPNCWBLECTROSONICS, INC.10Programmable OutputsProgrammable outputs are used for several purposes:• indicatethecurrentstateofaprogrammableinput
Installation and Startup GuideRio Rancho, NM11Connecting the Master for the First TimeNOTE: Install ASPEN software before connecting the Master unit
SPNCWBLECTROSONICS, INC.12Software InstallationNOTE: Uninstall any previous version before installing the software.ASPEN Control Panel software can b
Installation and Startup GuideRio Rancho, NM13Software and Firmware UpdatesOn ASPEN models with a front panel LCD, the firmware version is displayed on
SPNCWBLECTROSONICS, INC.14Firmware Update ProcedureUpdate Procedure1) It is assumed that the USB drivers and ASPEN con-trol panel software have been i
Installation and Startup GuideRio Rancho, NM15MCU Recovery from Interrupted Firmware Update ProcedureIf instructed to do so by Lectrosonics Customer S
SPNCWBLECTROSONICS, INC.16Minimum SetupA required minimum setup is needed to allow the processor to pass signals and provide acoustic echo cancellatio
Installation and Startup GuideRio Rancho, NM17Acoustic Echo CancellerClick on the Acoustic Echo Canceller tab at the bot-tom of the conferencing scree
18The Signal Flow ScreenSelect the Signal Flow tab. This comprehensive, intui-tive interface allows settings to be made through the entire signal chai
19Unused crosspoint columns can be hidden and unhid-den by highlighting a range of Mixes across the top, fol-lowed by a right click and selection of t
SPNCWBLECTROSONICS, INC.2
20Network SetupThe SPNCWB is IP addressable over an ordinary Ethernet network. The use of DHCP to configure the network interface is recommended for ea
21Stacking Multiple UnitsIf Slave units are not powered up when the Master unit boots up, the Slave may not be detected for several minutes. It is goo
SPNCWBLECTROSONICS, INC.22Service and RepairIf your system malfunctions, you should attempt to correct or isolate the trouble before concluding that t
Installation and Startup GuideRio Rancho, NM23FCC PART 15 COMPLIANCE INFORMATIONThis equipment has been tested and found to comply with the limits for
5 November 2013581 Laser Road NE • Rio Rancho, NM 87124 USA • www.lectrosonics.com(505) 892-4501 • (800) 821-1121 • fax (505) 892-6243 •
Installation and Startup GuideRio Rancho, NM3This symbol, wherever it appears, alerts you to the presence of uninsulated danger-ous voltage inside the
SPNCWBLECTROSONICS, INC.4
Installation and Startup GuideRio Rancho, NM5IntroductionThe SPNCWB interface combines the audio from a telephone line, two codecs and microphones in
SPNCWBLECTROSONICS, INC.6Controls and FeaturesHeadphone MonitorStandard 1/4 inch jack and level control. Drives both channels of stereo headphones.MCU
Installation and Startup GuideRio Rancho, NM7SPNCWBASPEN PORTETHERNETRS-232CODEC1POWER AMP OUTPUTSLINE OUTPUTSCODEC2LINE INPUTSCODEC1CODEC212TELEPHONE
SPNCWBLECTROSONICS, INC.8Audio Inputs – UnbalancedUnbalanced audio sources include items such as con-sumer VCR’s, DVD players, etc., which can be conn
Installation and Startup GuideRio Rancho, NM9Programmable InputsProgrammable inputs are provided to enable external control over a variety of paramete
Comments to this Manuals