Lectrosonics SPNDNT User Manual download pdf (Page 14)

ASPEN Digital Processor

LECTROSONICS, INC.

100-240V

50/60Hz 30W

ASPEN PORTS

ETHERNET

RS-232

SPN 1624

OUTPUTS

INPUTS

OUTPUTS

INPUTS

GND

+5V

PROG IN

PROG

OUT

GND

PROG IN

+5V

PROG

OUT

Adaptive Proportional Gain Mixing

US Patent 5,414,776

S/N LABEL

DATECODE

Network and PC

Connections

The SPNDNT processor must be the Master at the top

of the ASPEN stack to synchronize the system and

network clocks.

Gigabit ethernet switch

Network Audio Transport

Audio I/O

These connections

are for setup and

control with ASPEN

Control Panel

software.

Supplied ASPEN cables

RS-232 ports for

external control system

CAT-5 or better

cables

Network Audio Transport

Server

CAT-6 cable

Ethernet switch

(optional)

To front panel

USB port

Using DHCP for IP Address Assignment

Follow these steps to make a network connection for

each processor:

1) Open the ASPEN Control Panel program and

connect to the processor via USB.

2) Click on the Device Settings tab (lower left)

then on the Network tab (left side). Click the

checkbox to enable DHCP.

3) Close the ASPEN Control Panel program.

4) Connect the network cable to the Ethernet port

on the rear panel.

5) Turn the processor power off then back on.

6) Open the ASPEN Control Panel program and

connect to the processor via USB.

7) Navigate to the Device Settings/Network tab

and make a note of the IP address and TCP

port number.

8) Close the USB connection and re-connect via

network. When the dialog box opens, enter the

IP address and the port number noted, then

click on Refresh. Click on the processor icon to

connect.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Comments to this Manuals

No comments

Lectrosonics SPNDNT User Manual Page 14

Comments to this Manuals

Related products and manuals for Audio accessories Lectrosonics SPNDNT