Lectrosonics SPNTWB User Manual Page 19

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 18
Installation and Startup Guide
Rio Rancho, NM
19
After selecting the mode and/or changing the passcode,
select SAVE with the rotary control and press the center
switch to save the settings.
A progress bar
will appear as the
settings are saved.
Press the LEFT (9:00 o’clock) button to return to the
previous screen.
Master Reset
Hold the LEFT and UP buttons in at power up to restore
factory default settings.
WARNING: Master Reset will remove all stored
settings, unlock the control panel and reset the
passcode to five center button presses.
Master Reset takes about 75 seconds to complete
while the Alert LED on the front panel glows white.
The display will then return to the Main Window and
the power LED will light up to indicate power ON and a
“ready” status.
Navigating Individual Settings
The following example illustrates the structure of the
LCD screens used to set up the processor.
Select a category from the Main Screen.
A submenu will provide a list of the specific adjustments
that can be made in that category. Rotate the scroll
wheel to highlight the desired setting and press the
center switch to select it.
EXAMPLE: Mic/Line Input Setup accesses a setup
screen where gain values, muting, phantom power,
polarity (phase) and delay can be adjusted.
Highlight the desired item and press the center switch
to enter the value for this setting. Press the center
switch to store the new setting (item highlight is re-
moved) before selecting another item or returning to the
previous menu.
NOTE: Press the center switch to store the value
(highlight is removed) before navigating to a
different item or menu.
Page view 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments