CR175 COMPACT RECEIVER OPERATING INSTRUCTIONS and trouble-shooting guide LECTROSONICS, INC. Rio Rancho, NM U.S. Patent Number: 5,414,776 and 5,40
SPECIFICATIONS Operating Frequencies: RF Sensitivity: IF Selectivity: Squelch Quieting: AM Rejection: Modulation Acceptance: Third Order Inter
Compact Receiver SERVICE AND REPAIR If your system malfunctions, you should attempt to correct or isolate the trouble before concluding that the equ
LIMITED ONE YEAR WARRANTY The equipment is warranted for one year from date of purchase against defects in materials or workmanship provided it was pu
This page intentionally blank. 2
Compact Receiver INTRODUCTION Thank you for selecting the Lectrosonics Professional Series wireless microphone system. This system represents well
CONTROLS AND FUNCTIONS - FRONT PANEL MODULATION LEDs Indicate the modulation (audio level) of the incoming signal, and can be used for proper adjust
Compact Receiver OUTPUT OFF POWER RF ON LECTROSONICS CR175 -20 0dB MODULATION Since the internal circuits are all tightly regulated the receiver will
CONTROLS AND FUNCTIONS - REAR PANEL 12 VDC INPUT Connects to the supplied CH-12 AC adapter for powering the receiver from a 110/120V AC source. Th
Compact Receiver ANTENNA USE AND PLACEMENT Connect the antenna to the front panel jack. Position the antenna so that it is not within 3 or 4 fee
OPERATING INSTRUCTIONS 1) Connect the power cord or install the battery. 2) Attach and extend the antenna. 3) Connect the audio cable. 4) Set
Compact Receiver TROUBLESHOOTING Before going through the following chart, be sure that you have a good battery in the receiver (or a properly con-nec
Comments to this Manuals