Lectrosonics D4 System User Manual download pdf (Page 11)

4-channel Digital Wireless System

Rio Rancho, NM, USA

Receiver

Audio Level Setup

FromtheMainWindow,pressFUNCandthenselect

the menu item Audio Lev.andpressFUNCagain.

The setup screen will vary slightly depending upon

whichAES3modehasbeenselectedandwhether

the 2-channel or 4-channel mode is selected. In the

2-channelmode,channels3and4willbeblank.

Use UP/DOWN

arrows to select

menu item and

press FUNC to

enter setup

1 2 3 4

When the receiver is conﬁgured for four

analog outputs, press the button under the

channel to be adjusted and then use the

UP and DOWN buttons to set the desired

level.

NOTE: The value shown in the setup screen is

the analog output level in dBu at the maximum

level before clipping.

1 2 3 4

When the receiver is conﬁgured for two

digital and two analog inputs, press the

button under the analog channel to be

adjusted and then use the UP and DOWN

buttons to set the desired level.

The audio level adjustment only applies

to analog outputs. When the receiver

is conﬁgured for four digital channels

using the two AES/EBU outputs, no level

adjustment is needed.

Locked/Unlocked Modes

The front panel controls can be locked to prevent

inadvertent changes to the selected settings. When

the panel is Locked, settings can be viewed but not

changed, with the exception of headphone selection

and monitoring level controls.

Use UP/DOWN

arrows to select

menu item and

press FUNC to

enter setup

Use UP/DOWN

buttons to select

desired mode

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comments to this Manuals

No comments

Lectrosonics D4 System User Manual Page 11

Comments to this Manuals

Related products and manuals for Equipment Lectrosonics D4 System

Powiązane produkty i podręczniki dla Maszyny do wiązania Duplo DB-200