Lectrosonics Pro 4 Channel User Manual

PRO 4 CHANNEL MULTI CHANNEL WIRELESS SYSTEM WITH DM4/DM4D DISTRIBUTION MODULE OPERATING INSTRUCTIONS and trouble-shooting guide LECTROSONICS, INC

LIMITED ONE YEAR WARRANTY The equipment is warranted for one year from date of purchase against defects in materials or workmanship provided it was p

INTRODUCTION The PRO 4 CHANNEL system is a high quality, multi-channel wireless microphone system designed for sound stage, studio, and theater appli

GENERAL TECHNICAL DESCRIPTION The PRO 4 CHANNEL consists of two sub-systems; the frame which contains the receivers, receiver mounting hardware, and

- -I- -I- -I- -IFRONT PANEL DESCRIPTION DM4D MODULE: POWER SWITCH - Power to the individual receivers is controlled with this switch. PWR LED - Thi

REAR PANEL DESCRIPTION SERIAL/FREQUENCY LABEL - This label indicates the serial number of the DM4 module. It also indicates the RF pass-band of the

INSTALLATION The PRO4 CHANNEL is designed to contain up to four receivers. Installation of these receivers is quite simple. First, place the entire

TROUBLESHOOTING SYMPTOM POSSIBLE CAUSE NO POWER LEDs OR AUDIO 1) Power switch in the OFF position. Switch to ON. POWER LED LIGHTS ON DM4 BUT NO LI

SPECIFICATIONS DM4/DM4D RF/POWER DISTRIBUTION MODULE RF Gain: 1.5 dB RF Output: DM4: Four outputs, 50 Ohm, BNC DM4D: Eight outputs, 50 Ohm, BNC Fi

SERVICE AND REPAIR If your system malfunctions, you should attempt to correct or isolate the trouble before concluding that the equipment needs repai