Lectrosonics R1 User Manual

R1 UHF MULTI-FREQUENCY BELT-PACK IFB RECEIVER OPERATING INSTRUCTIONS and trouble-shooting guide LECTROSONICS, INC. Rio Rancho, NM

SERVICE AND REPAIR If your system malfunctions, you should attempt to correct or isolate the trouble before concluding that the equipment

IFB Receiver NOTES Rio Rancho, NM – USA 11

LIMITED ONE YEAR WARRANTY The equipment is warranted for one year from date of purchase against defects in materials or workmanship provided it was pu

SAFETY NOTES Excessive sound levels can cause permanent hearing damage. 1. Always adjust the volume to the lowest level before listening to un-

IFB Receiver INTRODUCTION Thank you for selecting the Lectrosonics frequency agile, R1 IFB Receiver. The R1 is the result of extensive enginee

GENERAL TECHNICAL DESCRIPTION The IFB R1 Receiver is comprised of a number of functional subsystems as shown in Fig 1, Control Panel and Fig 2,

IFB Receiver HEADPHONE JACK (fig. 1) On the front panel is a 3.5mm mini phone jack to accommodate a standard mono or stereo type 3.5 mm

RECEIVER OPERATING INSTRUCTIONS Before operating a receiver, one or more IFB T1 transmitters must be placed in XMIT mode, with

IFB Receiver ERASE ALL 5 CHANNEL MEMORIES 1. With power OFF, depress the knob and turn the unit ON. Continue to hold the knob down until the

TROUBLESHOOTING SYMPTOM POSSIBLE CAUSE LED NOT LIT • Battery not installed or depleted • Power switch not on. NO SOUND IN HEADPHONE • AUDIO

IFB Receiver SPECIFICATIONS AND FEATURES Operating frequencies: 537.6 MHz to 608, 614 to 793.5 MHz (in 10 blocks) Number of frequencies: 256 per b