R170 RECEIVER OPERATING INSTRUCTIONS and trouble-shooting guide LECTROSONICS, INC. Rio Rancho, NM
REPLACEMENT PARTS and ACCESSORIES Part No. Description CH-12 110 Volt AC adapter for R170 receiver A-185PL Swivel-mount antenna with PL259 connect
SERVICE AND REPAIR If your system malfunctions, you should attempt to correct or isolate the trouble before concluding that the equipment needs repai
SPECIFICATIONS AND FEATURES R170 RECEIVER Operating frequencies: 150 to 216 MHz crystal controlled Sensitivity: 1.0uV for 20dB SINAD 2.0uV for 50dB
LIMITED ONE YEAR WARRANTY The equipment is warranted for one year from date of purchase against defects in materials or workmanship provided it was pu
INTRODUCTION Thank you for selecting the Lectrosonics R170 receiver. This system provides reliable performance and flexibility for a wide range of u
GENERAL DESCRIPTION The R170 receiver utilizes a two stage quartz crystal oscillator to assure that the frequency will not drift. Custom made high Q
RECEIVER FRONT PANEL MODULATION - Indicates the modulation (audio level) of the incoming signal. The green LED indicates an adequate modulation leve
RECEIVER REAR PANEL ANTENNA terminal -- A standard PL 259 connector for mounting the A-185PL antenna, or connecting the A-185Coax remote antenna. 12V
USE AND PLACEMENT A wireless transmitter sends a radio signal out in all directions. Indoors, this signal will often bounce off nearby walls, ceilin
OPERATING INSTRUCTIONS SET UP AND OPERATION SEQUENCE 1) CONNECT POWER CORD -- Plug the connector into the jack labeled "12 VDC ". Inser
MULTI-CHANNEL AUDIO MIXING The R170 receiver offers a unique feature that eliminates the necessity of using an external audio mixer in multi-channel
TROUBLESHOOTING Before going through the following chart, be sure that you have a good battery in the transmitter. It is important that you follow t
Comments to this Manuals