INSTRUCTION MANUAL R172 DUAL-RECEIVER LECTROSONICS, INC. 581 Laser Road Rio Rancho, NM 87124 USA Tel (800) 821-1121 or (505) 892
MULTI-CHANNEL AUDIO MIXING The R172 receiver offers a unique feature that eliminates the necessity of using an external audio
---------------------------------------------------------------- ---------------------------------------------
FACTORY REPAIR SERVICE ALWAYS CONTACT THE FACTORY BEFORE SHIPPING ANYTHING BACK FOR SERVICE. DO NOT t
INTRODUCTION The R172 receiver is a fixed frequency design two channel wireless microphone receiver. Desi
RECEIVER FRONT PANEL Front panel controls on the R172 are identical for each channel and operate independently from ea
RECEIVER REAR PANEL ANTENNA terminals -- Standard BNC 50 ohm connectors for connecting the antennas. The R172 is
Figure 2 R172 Rear Panel 4
OPERATING INSTRUCTIONS SET UP AND OPERATION SEQUENCE 1) CONNECT POWER CORD -- Plug the connector of the CH-12 adapter
If the system will be installed with dual antennas -Attach both antennas to the dual BNC connectors on the back of the receiver. Set
3) CONNECT THE AUDIO CABLE/S -If the receiver will be connected directly to an amplifier and there is only one audio i
ANTENNA USE AND PLACEMENT Extend the antennas fully. Position the antennas so that they are not touching each other or within 3 or 4 f
Comments to this Manuals