Lectrosonics R5 User Manual

R5 UHF MULTI-FREQUENCY BELT-PACK IFB RECEIVER EURO MODEL OPERATING INSTRUCTIONS and trouble-shooting guide LECTROSONICS, INC. www.lectrosonics.

LIMITED ONE YEAR WARRANTYThe equipment is warranted for one year from date of purchase against defects in materials or workmanship provided it was p

INTRODUCTION Thank you for selecting the Lectrosonics frequency agile, R5 IFB Receiver. The R5 is the result of extensive engineering experience

IFB Receiver GENERAL TECHNICAL DESCRIPTION The IFB R5 Receiver is comprised of a number of functional subsystems as shown in Fig 1, Control Pan

HEADPHONE JACK (fig. 1) On the front panel is a 3.5mm mini phone jack to accommodate a standard mono or stereo type 3.5 mm plug. The un

IFB Receiver SAFETY NOTES Excessive sound levels can cause permanent hearing damage. 1. Always adjust the volume to the lowest level before list

RECEIVER OPERATING INSTRUCTIONS Before operating a receiver, one or more IFB T5 transmitters must be placed in XMIT mode, with

IFB Receiver ERASE ALL 5 CHANNEL MEMORIES 1. With power OFF, depress the knob and turn the unit ON. Continue to hold the knob down until the

TROUBLESHOOTING SYMPTOM POSSIBLE CAUSE LED NOT LIT • Battery not installed or depleted • Power switch not on. NO SOUND IN HEADPHONE • AUDIO L

IFB Receiver SPECIFICATIONS AND FEATURES Operating frequencies: 537.6 MHz to 862.0 MHz Number of frequencies: 256 per block (using 26 MHz maxim