Lectrosonics R5a User Manual

R5a INSTRUCTION MANUAL UHF Multi-Frequency Belt-Pack IFB Receiver 0885 Rio Rancho, NM, USA www.lectrosonics.com Fill in for your records: Serial Nu

Service and Repair If your system malfunctions, you should attempt to correct or isolate the trouble before concluding that the equipment

Specifications and Features Operating frequencies (MHz): Block 525 Block 21 Block 22 Block 23 Block 24 Block 25 Block 26 Block 27 Block 28

LIMITED ONE YEAR WARRANTY The equipment is warranted for one year from date of purchase against defects in materials or workmanship provi

R5a LECTROSONICS, INC. 2

IFB Receiver Introduction Thank you for selecting the Lectrosonics frequency agile, IFBR5a Receiver. The R5a is the result of exten-sive

R5a Table of Contents Introduction ...

IFB Receiver General Technical Description The IFBR5 was upgraded to the IFBR5a by adding a number of important and useful features: (1

7ABCDEF7ABCDEF R5a Headphone Jack (fig. 1) On the front panel is a 3.5mm mini phone jack to accommodate a standard mono or stereo type 3.

IFB Receiver Receiver Operating Instructions Before operating a receiver, one or more IFB T5 trans-mitters must be placed in XMIT mode

R5a Erase All 5 Channel Memories 1. With power OFF, depress the knob and turn the unit ON. Continue to hold the knob down until the LED start

IFB Receiver Troubleshooting Symptom Possible Cause LED NOT LIT • Battery not installed or depleted • Power switch not on. NO SOUND IN HEADPHON