SR170 AC RECEIVER OPERATING INSTRUCTIONS and trouble-shooting guide LECTROSONICS, INC. Rio Rancho, NM
LIMITED ONE YEAR WARRANTY The equipment is warranted for one year from date of purchase against defects in materials or workmanship provided it was pu
INTRODUCTION The SR170 AC receiver design is the result of surveying the needs of professional video producers, audio visual coordinators, and many o
RECEIVER FRONT PANEL MODULATION - Indicates the modulation (audio level) of the incoming signal - see transmitter manual for proper adjustment of tra
RECEIVER REAR PANEL ANTENNA terminal - A standard BNC connector compatible with the supplied A-185BNC telescoping antenna. 12 VDC INPUT - Connect the
SYSTEM SETUP AND OPERATION 1) CONNECT POWER CORD - On your external power source, be sure the center pin is positive(+). 2) ATTACH AND EXTEND THE
ANTENNA USE AND PLACEMENT Connect the antenna to the rear panel jack. Extend the antenna fully. Position the antenna so that it is not touching or
TROUBLESHOOTING Before going through the following chart, be sure that you have a good battery in the transmitter. It is important that you follow t
SERVICE AND REPAIR If your system malfunctions, you should attempt to correct or isolate the trouble before concluding that the equipment needs repai
SR170 AC SPECIFICATIONS AND FEATURES Operating frequencies: 150 to 216 MHz crystal controlled Sensitivity: 1.0uV for 20dB SINAD 2.0uV for 50dB S/N
Comments to this Manuals