Lectrosonics UCR205d User Manual

UCR205D DIVERSITY UHF RECEIVER OPERATING INSTRUCTIONS and trouble-shooting guide LECTROSONICS, INC. Rio Rancho, NM www.lectrosonics.com

TROUBLESHOOTING POWER SUPPLY AND FUSE LEDs not lit or dimly lit • External power supply disconnected or inadequate. • Main power supply fuse tri

UHF Wireless Diversity Receiver SPECIFICATIONS AND FEATURES Operating Frequencies: Frequency Adjustment Range: Receiver Type: Frequency Stabili

SERVICE AND REPAIR If your system malfunctions, you should attempt to correct or isolate the trouble before concluding that the equipment needs

This page intentionally blank.

LIMITED ONE YEAR WARRANTYThe equipment is warranted for one year from date of purchase against defects in materials or workmanship provided it was pur

TABLE OF CONTENTS GENERAL TECHNICAL DESCRIPTION ... 3 FRONT PANEL CONTROLS AND FUNCTIO

UHF Wireless Diversity Receiver GENERAL TECHNICAL DESCRIPTION The UCR205D is a portable, high performance, dual-conver-sion, frequency synthe

DOUBLE BALANCED DIODE MIXERS In all wireless receivers, a mixer is used to convert the carrier frequency to the IF frequency where most of the

UHF Wireless Diversity Receiver position is useful for locating a clear frequency, since any potential interference may be heard. It may also be used

FRONT PANEL CONTROLS AND FUNCTIONS POWER LED When lit, this LED indicates that power is applied to the UCR205D and adequate voltage is present

UHF Wireless Diversity Receiver REAR PANEL CONTROLS AND FUNCTIONS DC IN JACK The UCR205D can be powered from external 10 to 16.5 Volts DC applied di

DIRECT SIGNALRECEIVER DIRECT SIGNAL INDIRECT SIGNAL INDIRECT SIGNAL TRANSMITTER PHASE REFLECTIVE SURFACE ANTENNA USE AND PLACEMENT “hiss” or a “swis

UHF Wireless Diversity Receiver INSTALLATION AND OPERATING INSTRUCTIONS 1. Connect the power cord. 2. Attach the antennas. 3. Connect the audi