UCR300 DIVERSITY UHF RECEIVER OPERATING INSTRUCTIONS and trouble-shooting guide LECTROSONICS, INC. www.lectrosonics.com 0885
FREQUENCY BLOCKS AND RANGES The table below lists the factory designated frequency ranges available for the UCR300 receiver. For convenience, th
UHF Wireless Diversity Receiver TROUBLESHOOTING POWER SUPPLY AND FUSE LEDs not lit or dimly lit • External power supply disconnected or inadequ
SPECIFICATIONS AND FEATURES Operating Frequencies: Frequency Adjustment Range: Receiver Type: Frequency Stability: Front end selectivity: Sen
UHF Wireless Diversity Receiver This product meets the CE Compliance Standards - ETS 300 445; January 1996. A copy of the Declaration of Conformi
LIMITED ONE YEAR WARRANTYThe equipment is warranted for one year from date of purchase against defects in materials or workmanship provided it was pur
Table of Contents GENERAL TECHNICAL DESCRIPTION ... 3 SERVICE AND REPAIR...
UHF Wireless Diversity Receiver GENERAL TECHNICAL DESCRIPTION The UCR300 is a portable, high performance, dual-conversion, frequency synthe
GENERAL TECHNICAL DESCRIPTION DOUBLE BALANCED DIODE MIXERS In all wireless receivers, a mixer is used to convert the car
UHF Wireless Diversity Receiver GENERAL TECHNICAL DESCRIPTION The mute circuit drives a relay which physically disconnects the output amplifier from
FRONT PANEL CONTROLS AND FUNCTIONS POWER LED When lit, this LED indicates that power is applied to the UCR300 and adequate voltage is present t
UHF Wireless Diversity Receiver REAR PANEL CONTROLS AND FUNCTIONS DC IN JACK The UCR300 can be powered from external 10 to 16.5 Volts DC applied dir
DIRECT SIGNALRECEIVER ANTENNA USE AND PLACEMENT There are two antenna assemblies included with this receiver. Position the antennas at least t
UHF Wireless Diversity Receiver INSTALLATION AND OPERATING INSTRUCTIONS 1. Connect the power cord. 2. Attach the antennas. 3. Connect the aud
Comments to this Manuals