Lectrosonics UCR511 User Manual

UCR511 UHF RECEIVER (Includes IFB Compatibility Mode) Featuring Digital Hybrid Wireless™ Technology (US Patent Pending) OPERATING INSTRUCTIONS 0560

UCR511 MENU SELECTIONS FROM MAIN WINDOW Main Window Frequency Scan Mode SELECT Lock/Unlock TX 7.2V RX 8.2V Pilot Off/On Battery Level Wi

UHF Wireless Digital HybridTM Receiver LEVEL, TONE, TXBAT, PHASE, SmtNR (in 500 Series mode only), TUNING and COMPAT. Each of these destina

UCR511 In the two user programmable frequency groups, up to 16 frequencies can be programmed per group. Note The Tuning Setup Screen only s

UHF Wireless Digital HybridTM Receiver FREQUENCY SCAN MODE B8 Scan ViewFine View Press All 3 Buttons B8 PressAnyButton Press

UCR511 ANTENNA USE AND PLACEMENT The receiver is supplied with two straight BNC antennas. In some circumstances remote antennas such as t

UHF Wireless Digital HybridTM Receiver INSTALLATION AND OPERATING INSTRUCTIONS 1. Install a fresh battery or connect an external power

UCR511 Scan B8 Vertical marker moves left to right 1000 100 10 1 uV RF activity Strength of RF activity is indicated in microvolts with m

UHF Wireless Digital HybridTM Receiver TO REPLACE THE BATTERIES Lift and open the bottom battery door cover with your thumb, rotate the door until i

UCR511 Frequency Coordination Intermodulation interference is a problem constantly lurking in the background, especially when working in

,41,A,4,0,41,A,21,A,50,B 0,B,24,54,E,E,E,UHF Wireless Digital HybridTM Receiver Compatible The following frequency combinations have no intermodulatio

UCR511 2

UCR511 frequencies in Row 2 Block 21 are compatible. However, frequencies in Row 1, Block 21 are not compatible with the frequencies in Row 2

UHF Wireless Digital HybridTM Receiver UCR511 REPLACEMENT PARTS AND ACCESSORIES Part No. Description 32251 Velcro mounting strips CCMINI Zipper

UCR511TROUBLESHOOTING Symptom Possible Causes INITIAL POWER ON LCD display not active or lit. External power supply disconnected or inad

UHF Wireless Digital HybridTM Receiver long. UHF helical antennas may be shorter, but are often less efficient. No RF Signal Make certain frequen

UCR511 Operating Frequencies (MHz): SPECIFICATIONS AND FEATURES Block 525:525.000 - 550.500 Block 21: 537.600 - 563.100 Block 22: 563.200 - 588.700

UHF Wireless Digital HybridTM Receiver SERVICE AND REPAIR If your system malfunctions, you should attempt to correct or isolate the trouble before

UCR511 This product meets the CE Compliance Standards - ETS 300 489; 2002-08, I ETS 300 422; August 2002 and ENG 0950-1; 2001. A copy of the Decl

UHF Wireless Digital HybridTM Receiver Rio Rancho, NM – USA 27

28UCR511LIMITED ONE YEAR WARRANTY LIMITED ONE YEAR WARRANTY The equipment is warranted for one year from date of purchase against defects in mate

UHF Wireless Digital HybridTM Receiver DIGITAL HYBRID WIRELESS™ (US Patent Pending) The Lectrosonics Digital Hybrid Wireless™ uses innova- This d

UCR511 Rule No. 2 ...

UHF Wireless Digital HybridTM Receiver GENERAL TECHNICAL DESCRIPTION The UCR511 is a portable, high performance, triple-conver

UCR511 (Surface Acoustical Wave) filters. The 244 MHz SAW filters combine sharp tuning, constant group delay, wide bandwidth and excel

UHF Wireless Digital HybridTM Receiver algorithm remains undetectable under most circumstances. RF-CONTROLLED DIGITAL NOISE FILTER In addition

UCR511 FRONT PANEL CONTROLS AND FUNCTIONS SEL Up SEL Down SEL Up/Down The SEL Up and Down pushbutton switches are used in conjunction with the ME

UHF Wireless Digital HybridTM Receiver MAIN WINDOW (LCD) RF levels - reference for RF level screen icon The Main Window displays information concerni