Lectrosonics Venue Series (Wideband) User Manual download pdf (Page 10)

Venue Wideband Receiver

LECTROSONICS, INC.

Initial Startup

When the Venue receiver is ﬁrst powered up the LCD

will show the ﬁrmware revision and the tuning range of

the host assembly.

As the boot sequence continues, the display will switch

to an overview of all six receiver channels. In this ex-

ample, six receiver modules are installed but no trans-

mitters are turned on. In this case the “P” will be blinking

since no pilot tone is detected.

The wideband Venue receiver is different than the 50

MHz version in that the receiver modules are detected

through a manual process rather than automatically at

bootup.PresstheMENU/SELECTcontrolandrotateit

to select “Detect” on the menu.

PresstheMENU/SELECTcontroltolaunchthedetec-

tion process.

It takes about 45 seconds to detect all the modules and

update the memory in the host assembly. Once com-

pleted, the LCD will brieﬂy display the results showing

the frequencies of the installed modules.

If a slot is not occupied by a module, the display will

place an “X” in that position.

The display then switches to the overview of all six

channels.

Any slot that is not occupied by a module will leave a

blank space in the overview display.

If a module in any position has been removed, changed

or added since the last use, the LCD will ﬂash a mes-

sage advising that the Detect process needs to be run

again.

In normal operation with all six channels running, the

overview display will include:

 • Audiolevel

 • RFlevel

 • Diversityantennaphaseactivity

 • Pilottonestatus

 • Transmitterbatterystatus

Audio level

RF level Transmitter

battery status

Pilot tone status

Diversity activity

(in Switched mode)

Once the initial startup is complete, go to the next

section of this manual for details on setup and

conﬁguration options.

To power off the unit, press and hold the red power

switch for several seconds. The LCD will display a mes-

sage brieﬂy then power down.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Comments to this Manuals

No comments

Lectrosonics Venue Series (Wideband) User Manual Page 10

Comments to this Manuals

Related products and manuals for Equipment Lectrosonics Venue Series (Wideband)