Lectrosonics Venue Series (Wideband) User Manual download pdf (Page 12)

Venue Wideband Receiver

LECTROSONICS, INC.

Resetting to Factory

Defaults

Resetting to Factory Defaults can be a time saver for

setting up the system. Start with the power turned off,

then hold Receiver Select Buttons 5 and 6 while power-

ing up the system.

POWER Switch

Receiver Select

Buttons 5 and 6

The Factory Default Settings are:

Level

+00 dBu

Phase

NORMAL

TxBatt

9V ALK

SmartNR

NORMAL

Compat

Dig. Hybrid

Tuning

NORMAL MODE

DivMode

Switched

LockSet

NOT LOCKED

RxCh

8, 0

System Setup with the LCD

It is generally best to complete these steps in the se-

quence shown.

 • Selectcompatibilitymodes

• SelectSmartNoiseReductionmode

(for Digital Hybrid Compat Mode only)

• Selectdiversitymodes

• Findclearchannelsandsettransmittersto

match the receivers

• Adjustaudiooutputlevel

• Selectaudiosignalphase

• Selecttransmitterbatterymonitoringmode

• Controlpanellockout

Selecting Compatibility Modes

Navigate to the Compat setup screen.

Six compatibility modes are available to match various

transmitter types. In this example, the Digital Hybrid

compatibility mode is selected for receiver module 1.

Press the Receiver Select button for each module and

rotatetheMENU/SELECTcontroltoselectthemode.

The following modes are available:

Compat

Setup Mode

Description

Dig. Hybrid Lectrosonics Digital Hybrid (HYB)

Mode 3 Mode 3 (M.3) (call for details)

200 Series Lectrosonics 200 Series (200)

100 Series Lectrosonics 100 Series (100)

TalkBack Talkback feature for use with

HH Handheld Transmitter

Mode 6 Lectrosonics IFB Series (IFB)

IFB Mode 6 (M.6) (call for details)

Shortcut: Press and hold the Receiver Select

button under the selected module (module 1 in

the example above) then press the buttons under

the other modules that are to be set to the same

mode.

If you are using Digital Hybrid transmitters, set them

and the matching receiver modules to the Dig. Hybrid

mode for best performance.

Talkback Feature

When Talkback is

enabled, the “P” for

Pilot Tone indicator

will turn to a “T” for

TalkBack

The Venue receiver is capable of a “TalkBack” compat-

ibility mode which enables a transmitter with TalkBack

functionality to switch its associated receiver’s audio

outputs between 2 XLR’s on the back panel. For in-

stance, under normal transmitter use (TalkBack inac-

tive), the audio will be mapped to the appropriate XLR

depending on which Venue slot the receiver module is

installed in (just like normal use). When the transmitter

enters TalkBack active mode… that audio will suddenly

switch to a different, predetermined, XLR on the back

panel. This functionality allows the transmitter to control

audio routing, and can be very useful for situations that

require real time talent-to-director feedback.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Comments to this Manuals

No comments

Lectrosonics Venue Series (Wideband) User Manual Page 12

Comments to this Manuals

Related products and manuals for Equipment Lectrosonics Venue Series (Wideband)