Lectrosonics Venue Series (Wideband) User Manual Page 21

  • Download
  • Add to my manuals
  • Print
  • Page
    / 32
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 20
Digital Hybrid Wireless™ Modular Receiver System
Rio Rancho, NM, USA
21
2. Select Search for a suitable driver for my device
(recommended) and click “Next >” to continue.
3. Check only CD-ROM drives then click Next > to
search the LecNet2
CD for the USB driver.
4. When the driver is found, the LecNet2
device
name will be displayed along with the location of the
driver. Click “Next > to install the driver.
5. Click “Finish” when the installation is complete.
USB Driver Installation (Windows 2000)
Subsequent Installations
Once the LecNet2
USB driver is installed in a Win-
dows
®
2000 system device, subsequent LectNet2 USB
devices will invoke the Found New Hardware Wizard
which will automatically load the LecNet2
USB driver
for the new device.
Firmware Update
Instructions
First you need to download the most recent firmware
from the web site.
http://www.lectrosonics.com/LecNet2/
Scroll down to Firmware Updates. Be sure to select the
correct version for the receiver - narrowband, wideband
or 944. Place the file on your local drive then unzip it.
The update instructions are in the Help section of the
software. Launch theLecNet2 software and open the
help file. Select “Advanced Topics,” then “Using the
Update Wizard.
The receiver will have to be opened in the update mode
- button press sequence is in the help file instructions.
Page view 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Comments to this Manuals

No comments