Lectrosonics UH100 User Manual download pdf (Page 8)

SPECIFICATIONS AND FEATURES

Operating frequencies: 537.6 to 588.7 MHz, 614.4 to 793.5 MHz

Frequency selection: 256 frequencies in 100kHz steps

RF Power output: 100 mW (nominal)

Frequency stability: ± 0.002%

Deviation: ± 20 kHz (max)

Spurious radiation: 90 dB below carrier at frequencies less than 1GHz

Equivalent input noise: -126 dBV

Input level: Nominal 2 mV to 300 mV, before limiting.

Input greater than 2V, with limiting.

Input impedance: 1K Ohm mic load impedance

Input compressor: Soft compressor, >30 dB range

Gain control range: 43 dB; semi-log rotary control

Modulation indicators: Dual LEDs indicate modulation level 12 dB below limiting and at

the onset of limiting.

Controls: 2-position “OFF-ON” slide switch. Control panel knob adjusts audio

gain. Rotary switches on side panel adjust transmitter frequency.

Audio Input Jack: 3-Pin XLR

Battery: Precision compartment auto-adjusts to accept any known alkaline

or lithium 9 Volt battery. (We’ve tried 150 different ones!)

Battery Life: 5 Hours with alkaline 9 Volt, 12 hrs with lithium

Weight: 6.6 ozs. including battery

Dimensions: 1.5 x 1.5 x 4.2 inches

Emission Designator: 180KF3E

Specifications subject to change without notice.

1 2 3 4 5 6 7 8 9 10

No comments

Lectrosonics UH100 User Manual Page 8