Lectrosonics UH195 User Manual Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 10
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
INTRODUCTION
Thank you for selecting the Lectrosonics UH195 plug-on transmitter. The UH195
combines over 80 years of engineering experience with the very latest components,
in a design that addresses the most demanding professional applications.
The design of the UH195 was the direct result of numerous conversations with
users, staging and touring companies and dealers across the US. The specific
concerns and needs brought up in these conversations led directly to the develop-
ment of the operational features offered on the UH195.
The UH195 is a rugged, machined aluminum package. Phantom power is provided
on pins 2 and 3. Level indicating LEDs are provided to make level settings quick
and accurate, without having to view the receiver. The battery compartment accepts
any 9 Volt alkaline battery and makes a positive connection via self-adjusting
contacts.
Only the UH195 transmitter is covered in this manual. Companion receivers are
covered in separate manuals. The UH195 will operate with any 195 Series
Lectrosonics receiver on the same frequency.
TABLE OF CONTENTS
INTRODUCTION .................................................................................................. 2
GENERAL TECHNICAL DESCRIPTION ............................................................ 3
INSTALLATION ..................................................................................................... 4
FRONT PANEL DESCRIPTION........................................................................... 5
REAR PANEL DESCRIPTION ............................................................................. 6
OPERATING INSTRUCTIONS ............................................................................ 8
REMOTE LEVEL CONNECTIONS ...................................................................... 9
TROUBLESHOOTING ......................................................................................... 9
SERVICE AND REPAIR ..................................................................................... 10
RETURNING UNITS FOR REPAIR ................................................................... 10
SPECIFICATIONS .............................................................................................. 11
APPENDIX 1: SERIAL PORT HARDWARE AND SOFTWARE ....................... 12
SERIAL PORT COMMANDS AVAILABLE ........................................................ 13
WARRANTY ......................................................................................... Back cover
The UH195 transmitter is FCC type accepted under Part 74: 470-608 MHz
2
Page view 1
1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments