Lectrosonics UH200 User Manual download pdf (Page 2)

INTRODUCTION

Thank you for selecting the Lectrosonics UH200 frequency agile, plug-on transmitter. The

UH200 combines over 80 years of engineering experience with the very latest components, in a

design that addresses the most demanding professional applications.

The design of the UH200 was the direct result of numerous conversations with users, staging

and touring companies and dealers across the US. The specific concerns and needs brought

up in these conversations led directly to the development of the operational features offered on

the UH200. Two hundred fifty six frequencies are user selectable in 100kHz steps to alleviate

interference problems in travelling venues.

The UH200 is a rugged, machined aluminum package. Phantom power is provided on pins 2

and 3. Level indicating LEDs are provided to make level settings quick and accurate, without

having to view the receiver. The battery compartment accepts any 9 Volt alkaline or lithium

battery and makes a positive connection via self-adjusting contacts.

Only the UH200 transmitter is covered in this manual. Companion receivers are covered in

separate manuals. The UH200 will operate with any 200 Series Lectrosonics receiver in the

same frequency group.

TABLE OF CONTENTS

INTRODUCTION .....................................................................................................2

GENERAL TECHNICAL DESCRIPTION ...............................................................3

CONTROLS AND FUNCTIONS ............................................................................. 4

OPERATING INSTRUCTIONS ..............................................................................5

OPERATING NOTES .............................................................................................5

ADJUSTING THE TRANSMITTER FREQUENCY ................................................5

TROUBLESHOOTING ............................................................................................6

BATTERY REPLACEMENT ................................................................................... 6

SPECIFICATIONS AND FEATURES .....................................................................8

SERVICE AND REPAIR .........................................................................................9

RETURNING UNITS FOR REPAIR .......................................................................9

WARRANTY ........................................................................................... Back cover

The UH200 transmitter is FCC type accepted under Part 74: 470 - 608MHz and 614 - 806MHz

1 2 3 4 5 6 7 8 9 10

No comments

Lectrosonics UH200 User Manual Page 2