Lectrosonics UM195 User Manual download pdf (Page 12)

SPECIFICATIONS AND FEATURES

Operating frequencies:

UM195: 470 to 608 MHz

RF Power output:

UM195: 100 mW (nominal)

Pilot tone: 32.768 kHz (± 2Hz); 5kHz deviation

Frequency stability: ± .002%

Deviation: ± 75 kHz (max)

Spurious radiation: 50 dB below carrier

Equivalent input noise: -126 dBV

Input level: Nominal 2 mV to 300 mV, before limiting.

Greater than 50 Volts maximum, with limiting.

Input impedance: Taps provided for 500, 1k, 10k Ohm

Input compressor: Soft compressor, >40 dB range

Gain control range: 43 dB; semi-log rotary control

Modulation indicators: Dual LEDs indicate modulation level 12 dB below limiting and at

the onset of limiting.

Controls: 3 position "OFF-MUTE-ON" slide switch for noiseless turn

on/turn off operation. Front panel knob adjusts audio gain.

Audio Input Jack: Switchcraft 5 pin locking (TA5F)

Antenna:

UM195: Detachable, flexible wire supplied. 50 Ohm port allows

connection to test equipment.

Battery: Precision compartment auto-adjusts to accept any known

alkaline 9 Volt battery. (We’ve tried 108 different ones!)

Battery Life:

UM195: 7.5 Hours with alkaline 9 Volt

Weight: 6.3 ozs. including battery

Dimensions: 3.1 x 2.4 x .75 inches

Emission Designator:

UM195: 200KF3E

1 2 ... 7 8 9 10 11 12 13 14

No comments

Lectrosonics UM195 User Manual Page 12