Lectrosonics UM200c User Manual download pdf (Page 3)

Frequency Agile UHF Belt-Pack Transmitter

INTRODUCTION

Thank you for selecting the Lectrosonics UM200C frequency agile, belt-pack trans-

mitter. The UM200C combines over 80 years of engineering experience with the very

latest components, in a design that addresses the most demanding professional

applications.

The design of the UM200C was the direct result of numerous conversations with

users, staging and touring companies and dealers across the US. The specific

concerns and needs brought up in these conversations led directly to the develop-

ment of the operational features offered on the UM200C. Two hundred fifty six

frequencies are user selectable in 100kHz steps to alleviate interference problems in

travelling venues, and the low frequency roll-off is user adjustable to adapt to varying

acoustic environments and preferences.

The UM200C is a rugged, machined aluminum package with a removable, spring

loaded belt clip. The input section provides a correct input tap for virtually any

microphone or line level audio source. 5 Volts of bias voltage is available to power

electret mics with either positive or negative bias. Level indicating LEDs are provided

on the control panel to make level settings quick and accurate, without having to

view the receiver. The battery compartment accepts any 9 Volt alkaline battery and

makes a positive connection via self-adjusting contacts. The antenna is a detach-

able, locking 1/4 wavelength flexible bronze cable that connects to a 50 Ohm SMA

port on the transmitter.

Only the UM200C transmitter is covered in this manual. Companion receivers are

covered in separate manuals. The UM200C will operate with any 200 Series Lec-

trosonics receiver in the same frequency group.

Rio Rancho, NM – USA

1 2 3 4 5 6 7 8 ... 15 16

No comments

Lectrosonics UM200c User Manual Page 3