Lectrosonics UT200 User Manual download pdf (Page 12)

SPECIFICATIONS

Operating Frequencies: 486.4 to 588.7 and 614.4 to 793.6 MHz

RF Power Output: 100mW

Pilot Tone: 32.765 kHz, ±2 Hz, 5kHz deviation

Frequency Stability: ±0.002%

Deviation: ± 75 kHz max

Spurious Radiation: Effectively none below 1GHz, above 1GHz At least 50dB

below the carrier

Equivalent Input Noise: –126 dBv

Input Level: Maximum SPL depends on mic element used

Input Compressor: Soft compressor, >30 dB range

Gain Control Range: 43 dB, semi-log rotary control

Modulation Indicators: Dual LEDs indicate modulation level 10 dB below clipping

and at the onset of limiting

Controls: Power ON/OFF, Audio ON/OFF and Battery Condition LED

located on bottom of unit; Bypass controls located inside

battery door

Gain control located inside battery door; Frequency switches to

adjust the transmitter frequency in 1.6 MHz and 100 kHz

increments located just below the mic head on the outside body

of the case.

Battery Precision compartment auto-adjusts to accept any known

alkaline or lithium 9 Volt battery. (We’ve tried 125 different ones!)

Weight: 13.2 ozs. with VariMic capsule and alkaline battery

Dimensions: 9." long x 2.05" diameter (at largest point) with VariMic capsule

Emission Designator: 200KF3E

Specifications subject to change without notice.

1 2 ... 7 8 9 10 11 12 13 14

No comments

Lectrosonics UT200 User Manual Page 12