Lectrosonics VI24 User Manual download pdf (Page 10)

10. The main screen, which shows an overview of the current settings, should

now look like this.

This display is telling us that the VI24 is connected (if you are working

6. On the main window, click numbered button

“1” to change the pin assignments for logic

output pin number 1. Make the settings as

shown.

7. Use the “Prev/Next Pin” spin control in the

bottom right-hand corner of the window to

advance to Pin 2’s assignments, select the

mixer in the drop-down list the same way, but

check only “carol”.

8. Use the “Prev/Next Pin” spin control to ad-

vance to Pin 3’s assignments, assign the

same mixer, but this time check both “ted” and

“alice”. (We’re pretending that those two

speakers have their own microphones but

share a camera, a common situation.)

9. Use the “Prev/Next Pin” spin control to ad-

vance to Pin 4’s assignments, and assign pin

4 as the “overview pin” by selecting “overview

pin” in the drop-down list.

Click OK when done.

offline, you’ll see the “not connected” status

instead), and that four output pins have

been assigned a function. The first pin is

assigned to Bob’s microphone alone, the

second to Carol’s, the third is shared be-

tween Ted and Alice, and the fourth is the

“overview pin”, becoming active when no

assigned input is active.

If anything looks incorrect, you can harm-

lessly repeat any previous step.

11. Save your work. From the File menu, click

“Save As...” and choose a name for your file.

You will now be able to recall these settings

at any time.

12. If you have been working offline, you’re now

finished until you can get your settings into

the VI24. Use the Quit button or the “Exit”

from the File menu to quit the VI24 software.

Once the VI24 is available, you can restore

your settings by running the VI24 software

and using “Open” from the File menu to read

the file you previously saved.

13. Click “Go Live”. You will be asked if you wish to update the VI24 with your new settings. Select “Yes”. A

progress indicator is displayed while the information is being transferred to the VI24. If you can see the VI24’s

led, you will notice that it flickers during programming. This is normal and is intended to indicate that the unit is

talking to the PC. The VI24 Status will now show that you are “Live”.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Lectrosonics VI24 User Manual Page 10

Comments to this Manuals

Related products and manuals for Accessories communication Lectrosonics VI24