Lectrosonics DNT16i User Manual download pdf (Page 11)

Installation and Quick Start Guide

Rio Rancho, NM

DNT Control Panel Software - Signal Flow

Conﬁguration

In each processor:

The following signal connections and routing must be

conﬁgured before the processor will pass signals.

• Inputs

• Matrixcrosspoints

• Outputs

In the Dante Network:

• TransmitChannels(deviceoutputs)

• Subscriptions(devicereceivechannels)

Be sure to save your settings into a Preset within the

processor and to a ﬁle on the computer as a backup.

Follow the instructions below to make a connection to

the processor.

DNT Software - USB Connection

Connect the processor to the computer via the front

panel USB jack. Launch DNT Control Panel and click

on Connect -> Connect via USB... in the upper left

corner of the screen.

Click on Connect via USB...

When the next screen opens, the connected processor

will appear in the screen. Click on OK to continue.

DNT Software - Ethernet Connection

Connect the processor to the network via the rear

panel Ethernet jack. The easiest way to establish an

Ethernet connection is to ﬁrst connect to the processor

via the USB port to discover or assign the IP address.

If DHCP is enabled and the IP address is assigned

by a network server, the address will appear in the

Network Settings dialog box. Otherwise a static IP

address may be entered into the same dialog box. See

page 10 for detailed network port setup instructions.

Launch DNT Control Panel and then open the setup

screen for the processor. Click on Device Settings ->

Network. A dialog box will open displaying the IP ad-

dress and TCP Port number.

Once the IP address and TCP Port number are veri-

ﬁed, launch DNT Control Panel and click on Connect

-> Connect via Network... in the upper left corner of

the screen.

Click on Connect via Network...

In the next screen, verify or enter the IP address of the

processor in the upper part of the screen, then click

on Search. The processor will appear. Click on OK to

continue.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comments to this Manuals

No comments

Lectrosonics DNT16i User Manual Page 11

Comments to this Manuals

Related products and manuals for Audio accessories Lectrosonics DNT16i