Lectrosonics R172 User Manual download pdf (Page 7)

If the system will be installed with dual antennas -

Attach both antennas to the dual BNC connectors

on the back of the receiver. Set the

ANTENNA MODE

switch to the

DUAL

position. If a telescoping whip

is used, fully extend the whip.

DO NOT USE TWO TELESCOPING WHIPS ATTACHED SIDE BY SIDE

AT THE RECEIVER.

There is little to no benefit of placing the antennas side by side. Place the coaxial

antennas in the same manner as described above. The two antennas should be placed at least 6 ft apart

for best reception. This will put each antenna into a different signal path (diversity) and reduce the

possibility of dropout.

Figure 4 Dual Antenna Options

1 2 3 4 5 6 7 8 9 10 11 12 13

No comments

Lectrosonics R172 User Manual Page 7