Lectrosonics VR Field (Wideband) User Manual download pdf (Page 12)

VR Field Wideband Receiver

LECTROSONICS, INC.

Resetting to Factory

Defaults

Resetting to Factory Defaults can be a time saver for

setting up the system. Start with the power turned off,

then hold Receiver Select Buttons 5 and 6 while power-

ing up the system.

POWER Switch

Receiver Select

Buttons 5 and 6

The Factory Default Settings are:

Level

+00 dBu

Level

+00 dBu

Phase

NORMAL

TxBatt

9V ALK

SmartNR

NORMAL

Compat

Dig. Hybrid

Tuning

NORMAL MODE

DivMode

Switched

LockSet

NOT LOCKED

RxCh

8, 0

System Setup with the LCD

It is generally best to complete these steps in the se-

quence shown.

 • Selectcompatibilitymodes

• SelectSmartNoiseReductionmode

(for Digital Hybrid Compat Mode only)

• Selectdiversitymodes

• Findclearchannelsandsettransmittersto

match the receivers

• Adjustaudiooutputlevel

• Selectaudiosignalphase

• Selecttransmitterbatterymonitoringmode

• Controlpanellockout

Selecting Compatibility Modes

Navigate to the Compat setup screen.

Six compatibility modes are available to match various

transmitter types. In this example, the Digital Hybrid

compatibility mode is selected for receiver module 1.

Press the Receiver Select button for each module and

rotate the MENU/SELECT control to select the mode.

The following modes are available:

Compat

Setup Mode

Description

Dig. Hybrid Lectrosonics Digital Hybrid (HYB)

Mode 3 Mode 3 (M.3) (call for details)

200 Series Lectrosonics 200 Series (200)

100 Series Lectrosonics 100 Series (100)

IFB Lectrosonics IFB Series (IFB)

Mode 6 Mode 6 (M.6) (call for details)

Mode 7 Mode 7 (M.7) (call for details)

Shortcut: Press and hold the Receiver Select

button under the selected module (module 1 in

the example above) then press the buttons under

the other modules that are to be set to the same

mode.

If you are using Digital Hybrid transmitters, set them

and the matching receiver modules to the Dig. Hybrid

mode for best performance.

Selecting the Noise Reduction Mode

When the Compat Mode is set to Digital Hybrid, three

settings are available that affect the high frequency

audio content and noise:

• NORMAL(factory default) applies a moderate

amount of noise reduction, dramatically reducing

hiss with virtually no discernible side effects.

• FULL applies more aggressive noise reduction with

transparency superior to the noise reduction system

used for many years in the earlier Lectrosonics

wide deviation analog systems.

• OFF applies no noise reduction for complete trans-

parency.

Navigate to the SmartNR setup screen.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Comments to this Manuals

No comments

Lectrosonics VR Field (Wideband) User Manual Page 12

Comments to this Manuals

Related products and manuals for Equipment Lectrosonics VR Field (Wideband)