Lectrosonics UT300VM User Manual

UT300 FREQUENCY-AGILE HAND-HELD TRANSMITTER EURO MODEL WITH VARI-MIC CAPSULE OPERATING INSTRUCTIONS and trouble-shooting guide LECTROSONICS, INC

BATTERY INSTALLATION The transmitter is powered by a standard alkaline 9 Volt battery. It is important that you use ONLY ALKALINE o

Frequency Agile Handheld Transmitter, Euro Model OPERATING INSTRUCTIONS 1) Install a fresh battery according to the instructi

TROUBLESHOOTING Before going through the following chart, be sure that you have a good battery in the transmitter. It is important that you follo

Frequency Agile Handheld Transmitter, Euro Model SPECIFICATIONS Operating Frequencies: 537.6 to 862.0 MHz in 26.5MHz blocks RF Power Output: 1

LIMITED ONE YEAR WARRANTYThe equipment is warranted for one year from date of purchase against defects in materials or workmanship provided it was p

This page intentionally blank. 2

Frequency Agile Handheld Transmitter, Euro Model INTRODUCTION Thank you for selecting the Lectrosonics UT300 hand-held wireless transmitt

GENERAL TECHNICAL DESCRIPTION The UT300 transmitters are comprised of a number of functional sub-systems as shown in the block diagram

Frequency Agile Handheld Transmitter, Euro Model PILOT TONE SQUELCH The 300 system utilizes an ultrasonic tone modulation

CONTROLS AND FUNCTIONS EXTERNAL “P” SWITCH – POWER ON/OFF Audio Power A slide switch which turns battery power on and

Frequency Agile Handheld Transmitter, Euro Model ADJUSTING THE TRANSMITTER FREQUENCY To change frequencies, remove the cover door on the side of

Internal Controls - VariMic Version Caution - Due to the high RF levels surrounding the transmitter, the sound of the Varimic capsul

Frequency Agile Handheld Transmitter, Euro Model too late. To solve this problem, the VariMic has a low frequency filter that is so sharp