Lectrosonics Long Ranger III User Manual download pdf (Page 9)

Portable Wireless Sound System

ANTENNA

BLACK

LEAD

WHITE

LEAD

BLACK

LEAD

SPEAKER

MOUNTING

BLOCK

Add-On

Receiver

BATTERY

Figure 4 - Add-on Receiver Antenna Connections

2) Remove and discard the two black Phillips head screws from the bottom of the antenna strip on the right-hand

side of the speaker and from the speaker mounting block. Using the supplied bright screws and lockwashers,

connect the shield ring lug (the black wire) to the speaker mounting block. Connect the center conductor ring lug

(the clear/white wire) to the antenna. Tighten both screws securely.

3) The Add-On receiver is to be mounted on the LONG RANGER III upright with velcro. The receiver should be

positioned, control panel up, between the horn mounting screw and the screw which secures the battery pack to

the upright. Remove the paper backing from one side of the velcro and affix it to the back of the receiver. Remove

the remaining paper backing and affix the receiver to the upright.

4) Connect the antenna plug to the BNC connector on the Add-On receiver. Connect the remaining two cables to the

12V DC OUTPUT jack and the LINE input jack on the control panel.

Rio Rancho, NM – USA

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Lectrosonics Long Ranger III User Manual Page 9