Lectrosonics EQ1_EQ2 User Manual download pdf (Page 9)

27 Band Automatic Equalizer

SPECIFICATIONS

EQ In: Balanced, RF protected, 40k Ohm impedance

Ref Mic In: Balanced, RF protected, 1.5k Ohm impedance

+15V phantom power (always present)

Thru Out: Parallel to EQ In, provides a pre-EQ output

Main Out: Balanced, 200 Ohm output impedance

EQ Type: 27 band, 1/3 octave, on ISO centers from 40Hz to 16kHz

Filter Type: Constant-Q, ±3% center frequency accuracy

Cut/Boost Range: ±15dB

Low Cut Filter: 200Hz, 6dB/octave

Pop Suppression Filter (DPS): Dynamic high-pass, maximum filter corner frequency is 1kHz,

6dB/octave. Threshold range at 100Hz is -40dBu to 0dBu.

Noise (20Hz to 20kHz)

All controls flat: -95dBu

All controls +12dB: -68dBu

All controls -12dB: -82dBu

THD: Less than 0.08% (20Hz to 20kHz, +4dBu in)

Frequency Response: +0/-3dB, controls flat, 20Hz to 70kHz

Maximum Levels

Input: +22dBu, controls flat

Output: +22dBu, controls flat

Specifications subject to change without notice.

Rio Rancho, NM – USA

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Lectrosonics EQ1_EQ2 User Manual Page 9