Lectrosonics Quadra User Manual download pdf (Page 11)

Digital IEM System

Split 3,4 Operation

Split modes allow you to use a single M4T transmitter

running in the 4 Channel mode to send two different

2 channel stereo mixes to two different receivers or

groups of receivers using a single radio frequency.

Split 3+4 mode delivers audio channels 3 and 4 to

the tall, thin knob and the lower concentric knob. The

knobs can be set up to function in three different ways.

NOTE: the transmitter must be in 4 Channel

mode for the receiver to work in this manner.

• Master(3,4)

Also equivalent to standard IEM systems where

only stereo signal is used. The tall, thin knob is

the stereo master volume and is fed from audio

channels 3 & 4. Here, although there is audio on

channels 1 & 2 in the transmission itself, they are

muted and thus the two individual knobs do not

function.

• Master(3)+4

Feeds audio channel 3 to the master volume (tall,

thin knob) and audio channel 4 to the lower con-

centric knob for independent control.

• 3+4

The two knobs function independently with neither

one working as a master. Feeds audio channel 3

to the tall, thin knob and audio channel 4 to the

lower concentric knob for independent control.

Master(3,4) mode

AUDIO CH.

FUNCTION

MASTER

VOLUME

MASTER

VOLUME

AUDIO

CH. 3

FUNCTION

Master (3)+4 mode

AUDIO

CH. 4

FUNCTION

3+4 mode

AUDIO

CH. 3

FUNCTION

AUDIO

CH. 4

FUNCTION

Rio Rancho, NM

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Comments to this Manuals

No comments

Lectrosonics Quadra User Manual Page 11

Comments to this Manuals