Lectrosonics Quadra User Manual download pdf (Page 8)

QUADRA

LECTROSONICS, INC.

MASTER

VOLUME

AUDIO CH.

FUNCTION

Master(1,2) mode

MASTER

VOLUME

Master(1)+2 mode

AUDIO

CH. 1

AUDIO

CH. 2

MASTER

VOLUME

FUNCTION

AUDIO

CH. 1

AUDIO

CH. 2

1+2 mode

FUNCTION

2 Channel Operation

In this mode, two channels are fed to the transmitter

and are available at the receiver.

NOTE: the transmitter must be also in 2 Channel

mode for the receiver to operate in this manner.

2-ch. mode allows for three different knob setups:

• Master(1,2)

This is the factory default and is equivalent to

standard IEM systems where only a stereo signal

is used. The tall, thin knob is the stereo master

volume.

• Master(1)+2

Feeds audio channel 1 to the master volume

(tall, thin knob) and audio channel 2 to the lower

concentric knob for independent control. You can

develop a stereo mix by panning each channel in

the stereo ﬁeld (see panning, below).

• 1+2

Gives you individual control over both audio

channels. Audio channel 1 is fed to the tall thin

knob, and audio channel two is fed to the lower

concentric knob. In this setup, there is no master

volume knob. You can develop a stereo mix by

panning each channel in the stereo ﬁeld (see pan-

ning, p. 10).

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Comments to this Manuals

No comments

Lectrosonics Quadra User Manual Page 8

Comments to this Manuals