Lectrosonics UDR300c User Manual download pdf (Page 25)

Wireless Diversity Receiver

SERVICE AND REPAIR

If your system malfunctions, you should attempt to correct or isolate the trouble before con-

cluding that the equipment needs repair. Make sure you have followed the setup procedure

and operating instructions. Check out the interconnecting cords and then go through the

TROUBLE SHOOTING section in the manual

We strongly recommend that you do not try to repair the equipment yourself and do not

have the local repair shop attempt anything other than the simplest repair. If the repair is

more complicated than a broken wire or loose connection, send the unit to the factory for

repair and service. Don’t attempt to adjust any controls inside the units. Once set at the

factory, the various controls and trimmers do not drift with age or vibration and never require

readjustment. There are no adjustments inside that will make a malfunctioning unit

start working.

LECTROSONICS service department is equipped and staffed to quickly repair your equip-

ment. In-warranty repairs are made at no charge in accordance with the terms of the war-

ranty. Out of warranty repairs are charged at a modest flat rate plus parts and shipping.

Since it takes almost as much time and effort to determine what is wrong as it does to make

the repair, there is a charge for an exact quotation. We will be happy to quote approximate

charges by phone for out of warranty repairs.

RETURNING UNITS FOR REPAIR

You will save yourself time and trouble if you will follow the steps below:

A. DO NOT return equipment to the factory for repair without first contacting us by letter or by

phone. We need to know the nature of the problem, the model number and the serial

number of the equipment. We also need a phone number where you can be reached 8 am

to 4 pm (Mountain Standard Time).

B. After receiving your request, we will issue you a return authorization number (R.A.). This

number will help speed your repair through our receiving and repair departments. The

return authorization number must be clearly shown on the outside of the shipping con-

tainer.

C. Pack the equipment carefully and ship to us, shipping costs prepaid. If necessary, we can

provide you with the proper packing materials. UPS is usually the best way to ship the

units. Heavy units should be “double-boxed” for safe transport.

D. We also strongly recommend that you insure the equipment, since we cannot be respon-

sible for loss of or damage to equipment that you ship. Of course, we insure the equip-

ment when we ship it back to you.

Mailing address: Shipping address: Telephones:

Lectrosonics, Inc. Lectrosonics, Inc. Regular: (505) 892-4501

PO Box 15900 581 Laser Rd. Toll Free (800) 821-1121

Rio Rancho, NM 87174 Rio Rancho, NM 87124 FAX: (505) 892-6243

USA USA

World Wide Web: http://www.lectrosonics.com Email: sales@lectrosonics.com

Rio Rancho, NM – USA

1 2 ... 20 21 22 23 24 25 26

No comments

Lectrosonics UDR300c User Manual Page 25