Lectrosonics VRFIELD (Narrowband) User Manual download pdf (Page 9)

Digital Hybrid Wireless™ Modular Receiver System

Typical Lectrosonics

Audio Output Wiring Diagrams

Antenna Combinations

ALP Series

RA500

SNA600

4. Insert a charged battery into the front panel, or plug

the VR Field power supply into a suitable outlet

and plug the power connector into the Power Input

Jack (unscrew the power connector that goes to the

battery). Repeat for each VR Field System being

Typical USB Hookup for Single VR Field System

Coaxial

Patch Cables

(Not Supplied)

Antenna Inputs

RS-232 Port USB Port on VR Field

System Rear Panel

installed.

5. Turn down the audio inputs on all the externally

connected equipment, then connect them to the ap-

propriate Audio Output XLR Jacks.

If the VR Field System is to be set up using a com-

puter system using a USB interface, connect a USB

cable between the USB connector on the rear panel

of the VRF and the computer system or a USB hub

connected to the computer system.

Refer to “Setting Up the VR Field System via the

USB Port”.

USB Port on

Computer System

Typical USB Hookup for Multiple VR Field Systems

USB Port

on VR FIeld

System Rear

Panel

USB Port on

Computer

System

Audio Output XLR Jacks

Rio Rancho, NM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

No comments

Lectrosonics VRFIELD (Narrowband) User Manual Page 9