Lectrosonics SPN812 User Manual download pdf (Page 21)

Installation and Startup Guide

Rio Rancho, NM

Stacking Multiple Units

If Slave units are not powered up when the Master unit

boots up, the Slave may not be detected for several

minutes. It is good practice to turn all units on simul-

taneously or turn on Slave units before turning on the

Master unit.

The available processors will appear in a “stack” on the

left side of the control panel. The Master unit will appear

at the top of the stack, with Slave units below it appear-

ing in the order that they are connected with the cable

connections to the ASPEN port jacks.

List of connected units

Refer to the cabling diagram for the ASPEN ports in the

section entitled Hardware Installation.

Refer to the Help Files

Once the processors are installed, conﬁgured and com-

municating with a computer system, refer to the Help

ﬁles in the software GUI for additional information re-

garding the available settings, adjustments and control.

1 2 ... 16 17 18 19 20 21 22 23 24

No comments

Lectrosonics SPN812 User Manual Page 21