Lectrosonics T4 User Manual download pdf (Page 7)

Multi-Frequency IFB Transmitter

Rio Rancho, NM

Press UP or DOWN arrow

Display External Power Voltage

(added feature with firmware Ver. 1.4)

From the Main Window, press and hold the MENU

button until a progress bar appears (about 4 seconds).

Lock/Unlock Panel Buttons

Continue holding the button until the bar reaches the

right side of the LCD. The selected mode will flash briefly.

IFBT4 Menu Diagram

COMPAT Setup Screen

The COMPAT setup screen selects

the current compatibility mode, for

interoperation with various types of receivers. The avail-

able modes are:

IFB - Lectrosonics IFB compatibility mode. This is the

default setting and is the appropriate setting to

use with the Lectrosonics IFBR1A or a compat-

ible IFB receiver.

400 - Lectrosonics 400 Series. This mode offers the

best audio quality and is recommended if your

receiver supports it.

100 - Lectrosonics 100 Series compatibility mode.

200 - Lectrosonics 200 Series compatibility mode.

MODE 3 and MODE 6 - Compatible with certain

non-Lectrosonics receivers.

Press MENU to return to the Setup window.

TUNING Setup Screen

The TUNING setup screen allows

selection of one of four factory set

frequency groups (Groups A through D), two user pro-

grammable frequency groups (Groups U and V) or the

choice to not use groups at all.

In the four factory set frequency groups, eight frequen-

cies per group are preselected. These frequencies are

chosen to be free of intermodulation products. (Refer to

receiver manual for more information).

In the two user programmable frequency groups, up to

16 frequencies can be programmed per group.

Note: The TUNING Setup Screen only selects

the tuning mode (NORMAL or Group tuning) and

not the operating frequency. Actual operating

frequencies are chosen through the Frequency

Window.

Press MENU to return to the Setup window.

Lock/Unlock Panel Buttons

To enable or disable the control panel buttons, navigate

to the Main Window and press and hold the MENU but-

ton for about 4 seconds. Continue holding the button as

a progress bar extends across the LCD. When the bar

reaches the right side of the screen, the unit will toggle

to the opposite locked or unlocked mode.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Comments to this Manuals

No comments

Lectrosonics T4 User Manual Page 7

Comments to this Manuals

Related products and manuals for Accessories communication Lectrosonics T4