Lectrosonics WM - Manual User Manual download pdf (Page 17)

Watertight Transmitter

Rio Rancho, NM

BLOCK FREQUENCY CAP ANTENNA

RANGE COLOR WHIP LENGTH

470 470.100 - 495.600 Black 5.86” 148.8 mm

19 486.400 - 511.900 Black 5.50 139.7 mm

20 512.000 - 537.500 Black 5.11” 129.8 mm

21 537.600 - 563.100 Brown 4.74” 120.4 mm

22 563.200 - 588.700 Red 4.48” 113.8 mm

23 588.800 - 614.300 Orange 4.24” 107.7 mm

24 614.400 - 639.900 Yellow 4.01” 101.9 mm

25 640.000 - 665.500 Green 3.82” 97.0 mm

26 665.600 - 691.100 Blue 3.62” 92.0 mm

Antenna Length by Block

The frequency block range is engraved on the outside

housing of the transmitter. If the label is missing or

not legible, the frequency block can be determined by

measuring the length of the antenna.

If the antenna is damaged in severe conditions and the

whip is cut to a shorter length, the table and template

can be used to verify that the antenna is the correct

length for the frequency block of the transmitter.

Measure the whip length from the dimensions in the

table, or print out this page and lay the transmitter on

top of the template.

NOTE: Be sure to verify that the print out is

100% of actual size. See the scale at the bottom

of the page.

Check the scale of your print out. This rectangle should be 6 inches (152.4 mm) wide.

ACTUAL SIZE

470

19 20 21 22 23 24 25 26

Frequency Block

Remove cap for accurate

measurement

Distance from top of housing to end of whip

-10

-20

AUDIO

BATT

AUDIO FREQ

PWR

RF ON

HOLD

QUICK

PWR

RF OFF

MODE

REMOTE

HOLD AT TURN ON

LOCK

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Lectrosonics WM - Manual User Manual Page 17

Comments to this Manuals

Related products and manuals for Accessories communication Lectrosonics WM - Manual