Lectrosonics DNTBOB 88 User Manual download pdf (Page 12)

ASPEN Digital Processor

LECTROSONICS, INC.

Signal Routing

When Dante Controller software is launched, all con-

nected units will appear in the control panel. Click on

the [+] next to the name of each unit to expand the

view to assign subscriptions and establish the signal

routing.

Channel subscriptions are made by clicking on the

crosspoint between the desired transmit channel and

the output on the on the appropriate receiver channel.

A green highlighted check mark will indicate that the

subscription is in effect.

When a receive channel subscription is assigned, the

corresponding transmitter channel will be enabled. If a

crosspoint is left blank, no signal will be transmitted to

minimize the bandwidth usage on the network.

This crosspoint subscription routes audio from

input 1 on DNTBOB88 (the transmitter) to output 1

on BobC (the receiver) using one Dante channel.

Multiple receivers can subscribe to a common transmit

signal on a single Dante channel.

These subscriptions route the audio from input

1 on DNTBOB88 (the transmitter) to outputs 1

through 3 on BobC (the receivers).

Refer to the Help ﬁles in Dante Controller for additional

information on channel assignments and the on-

screen indicators that appear in the control panel and

the additional settings and functions available.

1 2 ... 7 8 9 10 11 12 13 14 15 16

No comments

Lectrosonics DNTBOB 88 User Manual Page 12