Lectrosonics Quadra User Manual download pdf (Page 10)

QUADRA

LECTROSONICS, INC.

Master(1,2) mode

AUDIO CH.

FUNCTION

MASTER

VOLUME

MASTER

VOLUME

AUDIO

CH. 1

FUNCTION

Master (1)+2 mode

AUDIO

CH. 2

FUNCTION

AUDIO

CH. 1

FUNCTION

1+2 mode

AUDIO

CH. 2

FUNCTION

Split 1,2 Operation

Split modes allow you to use a single M4T transmitter

running in the 4 Channel mode to send two different

2 channel stereo mixes to two different receivers or

groups of receivers using a single radio frequency.

Split 1+2 mode delivers audio channels 1 and 2 to

the tall, thin knob and the lower concentric knob. The

knobs can be set up to function in three different ways.

NOTE: the transmitter must be in 4 Channel

mode for the receiver to work in this manner.

• Master(1,2)

Equivalent to standard IEM systems where only

stereo signal is used. The tall, thin knob is the ste-

reo master volume and is fed from audio channels

1 & 2. Although there is audio on channels 3 & 4

in the transmission itself, they are muted and thus

the lower main knob and two individual knobs do

not function.

• Master(1)+2

Feeds audio channel 1 to the master volume (tall,

thin knob) and audio channel 2 to the lower con-

centric knob for independent control.

• 1+2

The two knobs function independently with neither

one working as a master. Feeds audio channel 1

to the tall, thin knob and audio channel 2 to the

lower concentric knob for independent control.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Comments to this Manuals

No comments

Lectrosonics Quadra User Manual Page 10

Comments to this Manuals