Lectrosonics Quadra User Manual download pdf (Page 15)

Digital IEM System

 

  

   

  

   

     

Factory Defaults

This is used if you intend to reset the receiver back to

factory settings. Select Defaults on the main menu

and press MENU/SEL to select the two choices.

Default Setup restores the factory settings, but leaves

User Presets intact. Factory Wipe restores the factory

settings and deletes the stored User Presets.

Factory Default Settings:

• 4 Channel operation

• M (1,2)+3+4 knob setup

• RF Frequency 1 (907.776 MHz)

• Limiter at 0 dB threshold

• Pre-Gain at +0 dB

• Backlight: off at 5 minutes

• Treble Shelf: 5 kHz corner, +0 dB

• Unlocked

After using the MENU/SEL to select the appropriate

default operation, press MENU/SEL to continue the

operation.You will be asked to conﬁrm this step - you

must use the arrow keys to select Yes, followed by

pressing the MENU/SEL once again. Defaults Re-

stored or Factory Initialized will be brieﬂy shown on

the LCD, depending on which version of the default

operation was chosen. This indicates the process is

complete. If you have selected “Factory Wipe”, the

receiver will also re-boot and return to the main operat-

ing screen.

Using the Presets

Presets can be used to store all user settings includ-

ing Channel Setup, knob conﬁguration, panning, and

operating frequency. Five factory presets give you the

most common starting conﬁgurations, while eight user

presets allow you to customize your receiver and store

those detailed settings. This may be particularly useful

for monitor engineers who may wish to have a “copy”

of each musician’s settings in their own receiver pack.

Select Presets in the main menu and press MENU/

SEL to enter the submenu.

Four menu items are available in the sub-menu to

save, retrieve and delete stored settings: Load, Save,

Clear and None.

Load

To retrieve a factory preset or a previously saved user

preset, use the arrow buttons to select Load. Press the

MENU/SEL button to select this function.

The current Preset will be displayed

here. If no Preset is in use, the

character will be replaced by a

double dash symbol ( – – ).

Once in the Load from screen, use the UP and

DOWN arrow buttons to select from the ﬁve Factory

Presets and the eight User Presets. Unused preset

slots will be indicated as (empty).

Rio Rancho, NM

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Comments to this Manuals

No comments

Lectrosonics Quadra User Manual Page 15

Comments to this Manuals