Lectrosonics UCR190 User Manual download pdf (Page 11)

UHF Compact Receiver

SPECIFICATIONS AND FEATURES

Operating Frequencies: 470MHz to 608MHz, crystal controlled

Sensitivity: Better than 0.35 uV for 20dB SINAD;

1.5 uV for 50dB S/N ratio

Signal/Noise Ratio: 106dB A-weighted

Squelch Quieting: greater than 106dB

AM Rejection: -60dB (10uV to 0.1 Volts)

Modulation Acceptance: ±15kHz

Image and Spurious Rejection: greater than 100dB

Third Order Intercept: -5 dBm

Audio Outputs:

XLR: 200 Ohms balanced; 100mV max.

Headphone: 0.6 Volts RMS into 50 Ohms

Antenna Input: BNC; 50 Ohms impedance

Controls: Front panel attenuator controls XLR output.

Recessed trim-pot controls headphone 3 position

power/function switch.

Indicators: Red LED for power “ON” (Battery status)

2 LEDs for modulation level

“RF” LED for transmitter “ON”

Power Requirements: 11.5 to 18VDC external (either polarity)

110 VAC via CH-12 AC adapter

Single 9 Volt alkaline battery

Power consumption: 60mA at idle;

70mA at 15kHz deviation, with headphones

Battery Life: 5 hours with alkaline

Weight: 11 ounces including battery

Dimensions: 1.1" x 2.75" x 5.2"

Specifications subject to change without notice.

Rio Rancho, NM – USA

1 2 ... 6 7 8 9 10 11 12

No comments

Lectrosonics UCR190 User Manual Page 11