Lectrosonics VRFIELD (Narrowband) User Manual download pdf (Page 20)

VR Field

Help Menu

Help provides access to the online Help ﬁle, VRpanel

demonstration mode and an About Box featuring the

VRpanel’s current version number.

The Help ﬁle offers users detailed information on the

setup and operation of the VR Field System.

Client Area

The Client Area holds one or more panes, each graphi-

cally representing one VR system. Each pane, in turn,

holds from one to six plug-in receiver modules (receiver

modules). An information line at the top of each pane

identiﬁes the VR System USB Identiﬁcation and fre-

quency block range.

VR System

Information

Installed

Reciever

Modules (Plug-

in Receivers)

Popup Menu

Because VRpanel is capable of monitoring and control-

ling more than one VR system, none of the commands

available through the Menu Bar are available for individ-

ual systems. To work directly with a speciﬁc VR system,

right-click anywhere in its pane to open a popup menu.

This menu includes commands for conﬁguring the VRs

receiver modules, running the spectrum scanner, real-

time recording of a walk test, resetting the current VR

system back to factory defaults or deleting the current

VR system from VRpanel.

Set Up VR

The Set Up VR dialog is used to control all the stored

settings for the currently selected VR system.

This dialog allows for convenient selection and setup of

all installed receiver modules in the currently selected

VR system and global settings for the VRF. It consists

of three sections: Plug-In Receiver Selection, Plug-In

Receiver Settings and Master Settings. Changes to any

of the Plug-In Receiver Settings are done in real time.

Spectrum Scan

There are three sections to the Spectrum Scan dialog

box: cursors, spectrum scanner and command buttons.

Cursors controls cursor selection (and thus the tuning

of the selected receiver module). The cursor for the

selected receiver module appears as a dashed line in

the spectrum scanning section and its frequency detail

is displayed to the right of the cursor radio buttons.

This information includes the frequency block number,

transmitter frequency select switch settings, operating

frequency and TV channel.

When this dialog initially appears, a cursor will be

located at the set operating frequency for each installed

receiver module, or receiver module pair. Clicking Run

starts the spectrum scanner. A separate cursor moves

to identify the real-time location of the scan within each

frequency block.

All Receivers in Switched Diversity Mode

Cursor Select Receiver Module

Frequency Locations

Moving any of the cursors automatically changes the

operating frequency for the corresponding Receiver

Module, or module pair depending on the diversity

mode.

LECTROSONICS, INC.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Lectrosonics VRFIELD (Narrowband) User Manual Page 20

Comments to this Manuals

Related products and manuals for Equipment Lectrosonics VRFIELD (Narrowband)